19.6 Backlight Replacement
19.6.2 Replacement procedure of backlight
19
- 13
17
ADDI
TIO
N
TIMES
RE
SET FOR
MA
INTENA
N
C
E
18
INST
ALL
A
TI
ON OF
B
O
OT
O
S
A
ND
ST
A
N
DA
RD OS
19
MAIN
TE
NANCE A
ND
INSP
ECTIO
N
20
ERROR MESS
AGE
AND SYSTE
M
ALA
R
M
AP
PENDI
C
E
S
IND
E
X
6
Disconnect the cable connector of the upper (H01) backlight and the cable connector of the lower (H02)
backlight from the GOT side connectors.
7
Remove the cables of the upper connector (H01) from the 2 slits (black).
Similarly, remove the cables of the upper connector (H02) from the 2 slits (black).
(Expanded figure of part B in
)
8
Press the upper backlight fixing latch (black) with your finger, and pull out the backlight to the left.
Similarly, press the lower backlight fixing latch (black) with your finger, and pull out the backlight to the
left.
9
Mount a new backlight in the reverse procedure of removal.
10
When connecting the cable connectors of the backlight and the GOT unit, connect by crossing the cable
connectors each other as the below.
Also assemble the case in the reverse procedure of disassembly. (Tighten the GOT rear fixing screws
within the torque range of 0.36 to 0.48N·m).
When mounting the case, take care of not biting the cables between the case and the GOT.
(Expanded figure of part A in
)
6
B
A
B
6
Latch
