Mitsuba GOT1000, User Manual

Page: 142 / 532

8
- 16
8.1 Communication Unit
8.1.3 Installing multiple extension units in layers
4 When installing another extension unit on the unit that has been installed, implement the above
operations
of to .
5 When not installing an extension unit on the unit that has been installed, in order to avoid receiving
electrostatic, stick accessory labels to cover the top of mounting screws.
6 Keep the connector cover fixed.
7 Keep the seal stuck as it is.
8
(1) Installation position for a communication unit that occupies two extend I/Fs
Install a communication unit that occupies two extend I/Fs, such as the following,
directly to the GOT main unit.
It cannot be installed on the back stage of another communication unit.
If a video/RGB unit has been installed, install the communication unit on the back
stage of that video/RGB unit.
• Bus connection unit (GT15-QBUS2, GT15-ABUS2, GT15-75QBUS2L,
GT15-75ABUS2L only)
( 8.1.2 Bus connection unit)
• MELSECNET/10 communication unit
• ( 8.1.2 MELSECNET/10 communication unit, CC-Link
communication unit)
• CC-Link communication unit
( 8.1.2 MELSECNET/10 communication unit, CC-Link
communication unit)
• MELSECNET/H communication unit
( 8.1.2 MELSECNET/H communication unit, CC-Link
communication unit (GT15-J61B13))
• CC-Link communication unit (GT15-J61BT13)
( 8.1.2 MELSECNET/H communication unit, CC-Link
communication unit (GT15-J61B13))
(2) Installing the GT15-75QBUSL, GT15-75QBUS2L, GT15-75ABUSL, GT15-
75ABUS2L
These cannot be installed on the back stage of a video/RGB unit. For bus
connection, use the GT15-QBUS, GT15-QBUS2, GT15-ABUS, or GT15-ABUS2.
Seal
Accessory
labels
Connector
cover