Technician’s Handbook
174
FIM Carrier Assignments for Each Cabinet Type
n
Control Triple CIM card (FIM II optional) with the SX-200 ELx control
cabinet
n
Control Triple FIM Carrier and FIM with the SX-200 EL control
cabinet
n
Control Dual FIM Carrier and FIM with the SX-200 EL control cabinet
or SX-200 ML (RM) control cabinet
n
Control FIM Carrier and FIM with the SX-200 ML (FD) control
cabinet
n
Peripheral Interface Module Carrier (FIM II or CIM) with the SX-200
ELx peripheral cabinet
n
Peripheral FIM Carrier II with the SX-200 RM peripheral cabinet
n
Peripheral FIM Carrier with the SX-200 LIGHT peripheral cabinet
Configuration Rules for
the
Control Dual FIM Carrier Card
The SX-200 ML (RM) system is limited to only one peripheral cabinet
(Bay 2):
n
Slot 10 onboard FIM interfaces to first peripheral cabinet (Bay 2)
n
Slot 10 add-on FIM interfaces to second peripheral cabinet
(Bay 3)
n
Slot 11 onboard FIM interfaces to third peripheral cabinet (Bay 4)
n
Slot 11 add-on FIM interfaces to fourth peripheral cabinet (Bay 5)
In an SX-200 ELx cabinet, the BCC III can support a FIM II or a
CIM in a peripheral cabinet and the PRI card can support a
FIM II or a CIM in the main control cabinet and in the
peripheral cabinet. Taking advatage of this can replace the
need for a Peripheral FIM Carrier II or the Control Dual FIM
Carrier.
Summary of Contents for SX-200 EL
