Mitel SX-200 EL, Technician'S Handbook, Page: 198 / 262

Technician’s Handbook
188
T1 Trunk
Card
high power to CO or other PBX 24 maximum 655 shielded cable
to Channel Service Unit
Universal
card
high power Four modules:
MOH/Paging
DTMF Reciever,
E&M Trunk,Console Total power rating of modules
on Universal card cannot
exceed 10
Music-on
Hold/Paging
module 1 each power rating = 1
loop length - not applicable
DTMF
receiver
module DTMF telephone key-
pads and end-to-end
signaling equipment. 4 power rating = 2
loop length - not applicable
E&M trunk
module E&M tie trunk 1 power rating = 3
26 AWG - 1068 m (3500 ft.)
24 AWG - 1708 m (5600 ft.)
22 AWG - 2715m (8900 ft.)
Console
module interfaces to LCD
console only (4-wire) 1 power rating = 5
loop length - 305 m (1000 ft.)
Peripheral
Spine Node Three Modules:
LS/CLASS Trunk
DNIC, ONS Line
LS/CLASS
Trunk
module 4 LS/CLASS trunks
plus SFT for circuit 1
(SPINE Bay only) 4 External loop resistance:
1600
W
DNIC
module (for SPINE Bay only) 4 22 or 24 AWG - 1000 m (3300
ft.) including up to 50 m
(162.5 ft.) 22 AWG) quad wire
and up to 3 m modular line
cord without bridge taps.
ONS Line
module (for SPINE Bay only) 4 26 AWG - 700 m (2300 ft.)
24 AWG - 1128 m (3700 ft.)
22 AWG - 1784m (5850 ft.)
Table 31: Peripheral Interface Cards and Modules (Continued)
Peripheral
interface
card
Devices supported Circuits
Maximum loop
resistance/loop lengths
(Sheet 3 of 3)