Mitel SX-200 EL, Technician'S Handbook

Page: 125 / 262

Programming
115
Pro
gramming
10. Form 43, T1 Link Assignment
n
Assign the ISDN trunk T1 Link Descriptor to slot 6 and/or slot 8
on the PRI card bay.
11. Form 44, T1 Network Sync
n
Enter the links, according to their PLIDs, in the order that you
want them to be used as the network synchronization source.
12. Form 22, Modified Digit Table
n
DID Calling Party Number to the network interacts with the
current SX-200 system networking functionality and ignores
programmed node-id's in the PRI card. The Node ID Information
Element
( “*8”) for Analog Networking, if programmed in the Modified
Digit Table, will be ignored by the PRI card. If *6 is programmed
in the digit modification table the DID calling extension number
is sent to the PRI card and can be sent to the network as the
calling party. The extension must belong to a block of DID
numbers purchased from the Network provider.
Slip rate - network sync limit (0-9000)/24 hrs 7
BER - maintenance limit
(10**-n, n = (3,4,5,6))/hr 3
BER - service limit
(10**-n, n = (3,4,5,6))/hr 3
Framing losses - maintenance limit
(0-9000)/24 hrs 225
Framing losses - service limit
(0-9000)/24 hrs 9000
RTS timer - service limit exceeded (1-255 min) 30
RTS timer - net slip limit exceeded (1-255 min) 30
RTS timer - after alarm (0-300 sec) 10
Option Name Value
(Sheet 2 of 2)