Mitel MiVoice 5380 User Manual Download Page 6

Page: 6 / 148

MiVoice 5380 / MiVoice 5380 IP

eud-1679/1.0 – R3.0 – 08.2015

Product and safety information

Safety information

Failure to observe this information can be hazardous and infringe existing laws.

Connections

Always plug the phone cable connectors into the appropriate sockets. Do not

modify the connections in any way.

Mains power

Use the original power supply only. Connect the power supply only to power

sources that conform to the indications on the power supply. The device will be

inoperable when mains power of the communication system fails.

Retention of Metal Objects

Telephone receivers produce magnetic fields that can attract small metallic

objects such as pins and staples. To avoid injury, do not place the handset

where such objects can be picked up.

Maintenance

Make sure all installation and repair work is carried out by a specially qualified

technician.

Always use a soft, moistened, or antistatic cloth to clean your device. Do not

use chemicals or other chemical products.

Cost control and Data protection

You should protect your phone with a PIN so that no-one can make phone

calls at your expense. A code will also protect your personal settings.

Ambient conditions

Do not operate the device outside the temperature range of +5 °C to approx.

+40 °C. Avoid direct sunlight and other sources of heat.

Protect your device against the wet, excessive dust, corrosive liquids and

steam.

Do not expose your device to electromagnetic fields (electric motors, house-

hold appliances). The speech quality could be affected. To prevent interfer-

ence, avoid placing your handset in the immediate vicinity of computers,

radios, TV sets, VCRs, and other telephone sets.

Disposal

Be sure to dispose of your device, batteries and its packaging in an environ-

mentally compatible way. Electrical equipment does not belong in domestic

waste. Deposit it at a return centre.

Accessories

Use original accessories or specifically approved accessories only. The use of

other accessories may decrease performance or pose a risk to your health or

safety.

Summary of Contents for MiVoice 5380





















































































































































Search results

Summary of Contents for MiVoice 5380

Reviews:

Related manuals for MiVoice 5380

Brands by name

Popular brands

Mitel MiVoice 5380, User Manual

Search results

Summary of Contents for MiVoice 5380

Reviews:

Related manuals for MiVoice 5380

Brands by name

Popular brands