102
MiVoice 5380 / MiVoice 5380 IP
eud-1679/1.0 – R3.0 – 08.2015
Personalizing your phone
Formulating functions
This section explains how to activate an individual function, for example call for-
warding unconditional, with the aid of function commands and function codes and
how to assign it to a key.
Function commands, function codes
You can use the predefined selection to allocate functions to a configurable key (see
chapter "Store a function under a key – function key", page 95). You can also write your
own functions using function commands and function codes (select
Free configurable
function). The function commands are listed here; the function codes can be found in the
User's Guide User Guide Function Codes on the
Mitel DocFinder
.
You can use function commands to define a function to suit your personal requirements.
A function can consist of one or more function commands, function codes, and the phone
number.
The following function commands are available:
"A"
Seize line with highest priority
"I"
Seize line
"H"
Seize line in hands-free mode
"X"
Disconnect
"P"
Pause 1 second before the next operation
"Lxx"
Seize line xx (Line keys)
"N"
Use the phone number entered in call preparation
"."
Control key function (up-circuit system)
"Z"
Activate/deactivate DTMF mode
"R"
Use the phone number last dialled
"Y"
Disconnect and reseize the line
Other formulation examples:
"IR"
Seize line ("I"),
Dial phone number last dialled ("R")
"I201"
Seize line ("I") and dial phone number 201
"I*21201X"
Seize line ("I"),
activate call forwarding unconditional ("*21") to phone number 201,
disconnect ("X")
