Personalizing your phone
MiVoice 5380 / MiVoice 5380 IP
79
eud-1679/1.0 – R3.0 – 08.2015
Hands-free and headset settings
This section explains other ways in which you can make calls with your phone.
Automatic hands-free mode
You want to answer a call without picking up the handset or pressing a key.
You can choose whether your phone should immediately and automatically activate
hands-free operation after one ring, for internal calls or announcements.
To activate headset mode
You have connected a headset and now want to activate the headset mode.
A headset can be connected in parallel with the handset. You can switch the headset
mode on and off. If you answer a call in headset mode using the Call key or Loudspeaker
key, the call is provided on the headset. Alternatively you can also answer the call by pick-
ing up the handset.
This phone supports headsets based on the DHSG standard, which allows you to set up
and to end calls from the headset. Ask your dealer which headsets are particularly well
suited for this phone. When you connect a Bluetooth headset (see chapter "Activate
Bluetooth operation and Bluetooth device (MiVoice 5380 / 5380 IP only)", page 82), the
headset is automatically activated.
Menu
Press the
Menu
Foxkey.
Settings
Scroll to
Settings
and press the
Select
Foxkey.
Audio
Scroll to
Audio
and press the
Select
Foxkey.
Autom.Hands-free
Scroll to
Automatic hands-free
and press the
Modify
Foxkey.
<Audio setting>
Select the setting value for which you want to switch automatically to
hands-free and confirm with the
Ok
Foxkey.
➔
The setting is stored.
Notes:
• To avoid damages on the phone always disconnect the phone from the mains power
first before you install a DHSG (Digital Hook Switch) headset.
• To find out how to make phone calls with the headset, refer to the chapter "Using a
headset", page
23
.
