Mitel MiVoice 5380 User Manual Download Page 100

Page: 100 / 148

100

MiVoice 5380 / MiVoice 5380 IP

eud-1679/1.0 – R3.0 – 08.2015

Personalizing your phone

Configuring Line Keys

This section explains how to adapt your Line key settings to suit your personal

requirements.
Your system administrator will determine whether your phone has Line keys.

Setting the Response of a Line Key

You want to set the response of a line key.
You can choose whether you also want a ringing signal in addition to the flashing Line key

when you receive a call on a Line key. You can configure a ringing delay for the ringing

tone.

Fast take

(Pick up a Call) You can take an incoming call or an active call from another phone to

your phone.

Fast Take

must be enabled. Contact your system admin-

istrator for more information.

Presence menu

Menu for selecting a presence profile. For further information refer to

chapter "Organizing absences using the presence key", page 46.

Presence profile

This function allows you to activate/deactivate a presence profile. For

further information refer to chapter "Organizing absences using the

presence key", page 46.

Call recording

This function allows you to record an active call. The recordings are

stored in your individual e-mailbox only. For further information refer

to chapter "Recording a call", page 45.

Direct response

This function allows you to set up a call connection to a patient in

hands-free mode. For further information refer to chapter "Direct res-

ponse", page 67.

PIN call

Independently of the phone, you can, for a fee, make external calls.

The credit may be limited For further information refer to chapter "PIN

telephony", page 66.

PIN call rebook

You can charge the charges and call information of your outgoing

and incoming calls to certain projects. For further information refer to

chapter "PIN telephony", page 66.

Reception menu

Function key for the reception menu For further information refer to

chapter "Function keys and room keys on MiVoice M535expansion

module", page 118.

Room configuration menu

Function key for the reception menu For further information refer to

chapter "Function keys and room keys on MiVoice M535expansion

module", page 118.

Function

Description

Summary of Contents for MiVoice 5380





















































































































































Search results

Summary of Contents for MiVoice 5380

Reviews:

Related manuals for MiVoice 5380

Brands by name

Popular brands

Mitel MiVoice 5380, User Manual

Search results

Summary of Contents for MiVoice 5380

Reviews:

Related manuals for MiVoice 5380

Brands by name

Popular brands