Mitel 6865i SIP Phone Release 4.1.0 User Guide
70
Expansion Module Keys
6.
Select from
Key 1
through
Key 16
(M680i)
or
Key 84
(M685i).
7.
In the
Value
field, enter the phone number or extension you want to monitor.
8.
In the
Line
field, select a line for which to apply this key. Valid values are:
•
global
•
1
through
24
9.
Click
Save Settings
.
BLF/LIST KEY
The BLF/List feature on the IP phones is specifically designed to support the BroadSoft
BroadWorks Release 13 Busy Lamp Field feature.
This feature allows the IP phone to subscribe to a list of monitored users defined through the
BroadWorks web portal.
In addition to monitoring the idle and busy state, the BLF/List feature also supports the ringing
state. When the monitored user is idle, the corresponding key’s LED is off. When the monitored
user’s phone is ringing, the corresponding key’s LED flashes. Finally, when the monitored user
on an active call or is attempting to make a call, the corresponding key’s LED turns solid.
CONFIGURING A BLF/LIST KEY USING THE MITEL WEB UI
If you set a key to use BLF/List, you must also enter a
BLF List URI
at
Operation >
Programmable Keys > Services
. The
BLF List URI
is the name of the BLF list defined on the
BroadSoft BroadWorks Busy Lamp field page for your particular user. For example,
sip:[email protected]. The value of the
BLF List URI
parameter must match the list name
configured. Otherwise, no values display on the 6865i screen and the feature is disabled.
Note:
For use with the BroadSoft BroadWorks Release 13 or higher platform only. Your
System Administrator must have BLF/List enabled on the BroadWorks call manager.
Contact your System Administrator for more information.
Notes:
1.
You can use a BLF/List-configured key to automatically dial out to the configured
extension.
2.
The BroadWorks BLF feature is not the same as the BroadWorks Shared Call
Appearance (SCA) feature and does not permit call control over the monitored
extension.