Additional Features
157
ADDITIONAL FEATURES
This section describes additional features you can use on the 6865i phone.
DISPLAY DTMF DIGITS
A feature on the IP phones allows users to enable or disable DTMF (dual-tone multi-frequency)
digits to display to the IP phone when using the keypad to dial, or when dialing from a
programmed key.
DTMF is the signal sent from the phone to the network that you generate when you press the
phone’s touch keys. This is also known as touch-tone dialing. Each key you press on your
phone generates two tones of specific frequencies. One tone is generated from a
high-frequency group of tones and the other from a low frequency group.
If you enable the
Display DTMF Digits
parameter, the digits you are dialing from the keypad
or from a programmable key display to the IP phone’s LCD display. This parameter is disabled
by default (no digits display when dialing).
You can enable the
Display DTMF Digits
parameter using the Mitel Web UI.
CONFIGURING DISPLAY OF DTMF DIGITS
1.
Click on
Basic Settings > Preferences > General
.
2.
Enable the
Display DTMF Digits
field by checking the check box.
Disable this field by unchecking the box). Default is disabled.
3.
Click
Save Settings
.
MITEL WEB UI