Mitel 6865i SIP Phone Release 4.1.0 User Guide
108
6.
Click
Save Settings
.
Expansion Module Keys
7.
Select from
Key 1
through
Key 16
(M680i)
or
Key 84
(M685i).
8.
In the
Type
field, select
Paging
.
9.
In the
Value
field, enter a multicast IP address and a port number for the Paging key. When
you press this key, the phone initiates an outgoing multicast RTP session to the specified
address using the specified port. (For example, 239.0.1.15:10000).
10.
Click
Save Settings
to save your changes
USING THE PAGING KEY
The following procedure describes the use of the
Paging
key on the IP phone. The procedure
assumes you have already configured the
Paging
key using the Mitel Web UI.
1.
On the IP phone, press the key you configured for Paging.
The phone opens a multicast RTP session and an outgoing OR incoming phone screen
displays.
2.
Press the
Drop
key to end the multicast RTP session and return to the idle screen.
Notes:
1.
When you select
Paging
for the
Type
field, the
Line
field is disabled.
2.
The
Value
field allows for one multicast address entry only.
3.
To receive RTP steams for Group Paging, you must also configure the
Paging
Listen Addresses
parameter at the path,
Basic Settings > Preferences > Group
Paging RTP Settings
. For more information about setting this parameter, see
“Group RTP Paging”
on
page 172
.
Notes:
1.
The recipient of a Paging call can set a global Do Not Disturb (DND) to ignore any
incoming pages.
2.
For incoming Paging, the phone uses the Intercom configuration settings. The
incoming Page is dependant on the Allow Barge In parameter setting and the
Idling/On Call state.
IP PHONE UI
Note:
If you enable global DND on the phone, the incoming multicast RTP session is
dropped.
