Getting Started
15
•
Call Forward status
•
DND (Do Not Disturb) On
•
Number of missed calls
When more than one status message displays, the
2
is shown after the message to indicate
that you can use the
2
and
5
navigation keys to scroll through the remaining messages.
INCOMPLETE CONFIGURATION
If your phone displays an
Incomplete Config
message without any extension or user name
at the end of the start up sequence instead of an Idle state screen, this indicates the phone
configuration that was downloaded from the configuration server is not complete or correct.
Contact your System Administrator for assistance.
NO SERVICE
When the phone is not properly connected to the network, or the account has not been
configured by the Network Administrator, the
No Service
or
Network Disconnected
prompt
appears on the display and the telephone status light turns ON. Check that the cables are tightly
connected to the phone and to the wall jack. The phone should automatically detect when the
connection is reconnected and display the
Network Connected
prompt temporarily.
If changes have been made to your phone settings, you may need to restart your phone. For
more information on restarting your phone, see
“Restarting Your Phone”
on
page 51
.
For more information about connecting your phone, refer to the
Mitel 6865i Installation Guide
or check with your System Administrator for assistance.
John Smith
CFWD All
Tue Aug 20 2:55pm
L1
Network Connected
L1
