Mitel 6865i User Manual Download

Page: 189 / 203

Additional Features

187

To Deactivate Call Forwarding of Filtered Calls

Use the following procedure to deactivate call forwarding of filtered calls:

Click on

Basic Settings->Account Configuration

Remove the checkmark in the “

Enabled

” box beside the “

Divert

” option under “

Forward

Filtering

”.

Click

Save Settings

Press the

Options

key, the

navigation key, and then the

Enter

key to enter the Call

Forward menu
or
Press the

Call Forward

programmable key.

Press the

navigation key three times to select Forward Filtering.

Press the

Change

key to enter the Call Forward Mode Forward Filtering menu.

Press the

navigation key to highlight the Call Forward State menu.

Press the

Change

key to enter the Call Forward State menu.

Press the

Next

key to toggle the Call Forward State option from ON to OFF.

Press the

Set

key.

Press the

Done

key.

Press the

Confirm

key to apply the changes.

An X will be displayed beside Fwd Filtering indicating call forwarding of all filtered calls is
to be deactivated.

10.

Press the

Done

key again.

11.

Press the

Confirm

key again.

MITEL WEB UI

IP PHONE UI

Summary of Contents for 6865i












































































































































































































Search results

Summary of Contents for 6865i

Reviews:

Related manuals for 6865i

Brands by name

Popular brands

Mitel 6865i, User Manual

Search results

Summary of Contents for 6865i

Reviews:

Related manuals for 6865i

Brands by name

Popular brands