MIOX RIO-S Series Operators Manual
102-00130-D
Page
15
an available drain for ease of draining the tank or in case of minor overflows. Additionally,
MIOX recommends placing the oxidant tank near an external wall for ease of hydrogen
venting as described in the Hydrogen Safety White Paper.
NOTE: Failure of the system that can be traced to improper
temperature conditions is not covered under the MIOX warranty.
Receiving and Unpacking the RIO-S OSG
Your RIO-S OSG has been carefully packed to avoid shipping and handling damage.
The OSG is shipped on a crated pallet. Brine generator tanks, oxidant tanks, water
softeners, and other ancillary equipment are shipped on separate pallets. To safely
unpack the OSG complete the following steps:
1.
Unpack the OSG -
Remove the crate from around the enclosure. Check the
enclosure for any damage that may have occurred during shipping.
2.
Unpack Installation Kits -
Remove the contents from the brine generator and
oxidant storage tanks. These items include the OSG installation kit, the tank level
switch(s), the softener installation kit, and the solution tank drop tube.
3.
Unpack the water softener -
Remove the water softener towers from their
packaging. Do not turn the softeners over or lay them on their sides as this will
disturb the softening resin and gravel beds inside the softener and affect softener
performance.
4.
Unpack all other equipment -
Remove any optional components (heaters,
chillers, injection systems, etc.) from their packaging and inspect for damage. After
completing a visual inspection, compare ordered items against what was delivered.
Should you find anything damaged or missing, please contact your MIOX sales agent
or MIOX Customer Service.
