Mini CONVERTIBLE, Owner'S Manual

Page: 90 / 324

Adjusting the height: John Cooper
Works sport seat
The height of the head restraints cannot be
set.
Adjusting the height
– To lower: press the button, arrow 1, and
push the head restraint down.
– To raise: push the head restraint up.
After setting the height, make sure that the
head restraint engages correctly.
Removing: John Cooper Works
sport seat
The head restraints cannot be removed.
Removing
Only remove the head restraint if no one
will be sitting in the seat in question.
1. If necessary, fold the rear seat backrest
forward.
2. Pull head restraint up to the stop.
3. Press the button, arrow 1, and pull the
head restraint out completely.
Installing
Proceed in the reverse order to install the
head restraint.
Rear head restraints
Safety information
Warning
Removal or incorrect adjustment of head
restraints can cause injuries in the head
and neck area. There is a risk of injury.
– Before driving, install the removed
head restraints on the occupied seats.
– Adjust the head restraint so its center
supports the back of the head at as
close to eye level as possible.
– Adjust the distance so that the head
restraint is as close as possible to the
back of the head. Adjust the distance
via the backrest tilt as needed.
Warning
Body parts can be jammed when moving
the head restraint. There is a risk of injury.
Make sure that the area of movement is
clear when moving the head restraint.
Warning
Objects on the head restraint reduce the
protective effect in the head and neck
area. There is a risk of injury.
Seite 90
CONTROLS Seats, mirrors and steering wheel
90
Online Edition for Part no. 01405A53AA0 - II/22