Mini CONVERTIBLE Owner'S Manual Download Page 288

Page: 288 / 324

Breakdown Assistance

Vehicle features and options

This chapter describes all standard, country-

specific and optional features offered with

the series. It also describes features and

functions that are not necessarily available

in your vehicle, e.g., due to the selected op-

tions or country versions. This also applies

to safety-related functions and systems.

When using these functions and systems,

the applicable laws and regulations must be

observed.

Hazard warning flashers

The button is located above the Control Dis-

play.

The red light in the button flashes when the

hazard warning flashers are activated.

Warning triangle

The warning triangle is located in the cargo

area.

First-aid kit

General information

Depending on the vehicle equipment and

country-specific version, the vehicle is

equipped with a first-aid kit.
Some of the articles have a limited service

life.
Check the expiration dates of the contents

regularly and replace any expired items

promptly.

Storage

Storage for the first-aid kit is provided in

the cargo area.

MINI Roadside Assistance

Principle

MINI Roadside Assistance can be contacted

if assistance is needed in the event of a

breakdown.

Seite 288

MOBILITY

Breakdown Assistance

288

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands