Mini CONVERTIBLE Owner'S Manual Download Page 66

Page: 66 / 324

other qualified service center or repair

shop.

Malfunction

General information

A Check Control message is displayed.
Vehicle key detection by the vehicle may

malfunction under the following circum-

stances:

–

The battery of the vehicle key is dis-

charged. For replacing the battery, refer

to page

–

Fault of the radio link from transmission

towers or other equipment with high

transmitting power.

–

Shielding of the vehicle key due to metal

objects.
Do not transport the vehicle key to-

gether with metal objects.

–

Fault of the radio link from mobile

phones or other electronic devices in di-

rect proximity to the vehicle key.
Do not carry the vehicle key in close

proximity to other electronic devices.

–

Fault of radio transmission by a charg-

ing process of mobile devices, for in-

stance charging of a mobile phone.

–

The vehicle key is in direct proximity of

the wireless charging tray.
Place the vehicle key in a different loca-

tion.

In the case of interference, the vehicle can

be unlocked and locked from the outside

with the integrated key, refer to page

Starting the engine via emergency

detection of the Vehicle key

It is not possible to start the engine if the

vehicle key has not been detected.
Proceed as follows in this case:

Hold the vehicle key against the mark

on the steering column as shown. Pay

attention to the display in the instru-

ment cluster.

If the vehicle key is detected:
Start the engine within 10

seconds.

If the vehicle key is not recognized, slightly

change the position of the vehicle key and

repeat the procedure.

Frequently Asked Questions

What precautions can be taken to be able to

open a vehicle with an accidentally locked

in vehicle key?

–

The options provided by the Remote

Services of the MINI Connected app in-

clude the ability to lock and unlock a ve-

hicle.
This requires an active MINI Connected

contract and the MINI Connected app

must be installed on a smartphone.

–

Unlocking the vehicle can be requested

via the MINI Connected Call Center.
An active MINI Connected contract is

required.

Seite 66

CONTROLS

Opening and closing

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands