Mini CONVERTIBLE Owner'S Manual Download Page 140

Page: 140 / 324

Resetting average values

Press and hold the button on the turn signal

lever.

Engine temperature display

Principle

The current engine temperature, based on a

combination of coolant and engine oil tem-

perature is displayed. As soon as the opti-

mum operating temperature has been at-

tained, the indicator is in the center

position.

General information

If the engine oil or coolant, and thus the en-

gine, become too hot, a Check Control mes-

sage is displayed too.

When the engine temperature is too

high, a red indicator light is dis-

played.

When the engine oil temperature is

too high, a red indicator light is dis-

played.

To check the coolant level, refer to

page

278

Instrument cluster without enhanced

features: display

Instrument cluster with enhanced

features: display

Always Open Timer

The Always Open Timer displays the cur-

rent travel time and total travel time with

the convertible top open in minutes and

hours.

Reset the Always Open Timer

Reset the current travel time: press button

on the turn signal lever for approx.

sec-

onds with the travel times displayed.

Seite 140

CONTROLS

Displays

140

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands