Mini CONVERTIBLE Owner'S Manual Download Page 193

Page: 193 / 324

Adjusting the speed

Maintaining/storing the speed

Press

button in the interrupted

state.
When the system is switched on, the cur-

rent speed is maintained and stored as the

set speed.
The stored speed is displayed in the instru-

ment cluster.
If necessary, the Dynamic Stability Control

will be turned on.

Changing the speed

button: press until the desired

speed is set.
If active, the displayed speed is stored and

the vehicle reaches the stored speed when

the road is clear.

–

button: each time it is

pressed to the point of resistance, the

desired speed increases or decreases by

approx. 1

mph/1

km/h.

–

button: each time it is

pressed past the resistance point, the

desired speed changes by a maximum of

mph/10

km/h.

–

button: press button to re-

sistance point and hold. The vehicle ac-

celerates or decelerates without pres-

sure on the accelerator pedal. After the

rocker switch is released, the vehicle

maintains its final speed. Pressing the

switch beyond the resistance point

causes the vehicle to accelerate more

rapidly.

Continuing cruise control

General information

An interrupted cruise control can be contin-

ued by calling up the stored speed.

Make sure that the difference between cur-

rent speed and stored speed is not too large

before calling up the stored speed. Other-

wise, unintentional deceleration or acceler-

ation may occur.

Calling up the stored speed

Press the button on the steering

wheel.

The stored speed is reached again and main-

tained.

Displays in the instrument cluster

Indicator light

Instrument cluster without enhanced

features:
Depending on how the vehicle is

equipped, the indicator light in the instru-

ment cluster indicates whether the system

is switched on.

Instrument cluster with en-

hanced features:
The indicator in the instru-

ment cluster lights up: the sys-

tem is switched on.

Set speed and stored speed

Instrument cluster without enhanced

features:
The desired speed is displayed to-

gether with the symbol.

–

Display lights up green: system is active,

the display indicates the desired speed.

–

Display lights up orange: system is in-

terrupted, the display indicates the

stored speed.

–

No display: system is switched off.

Seite 193

Driving comfort

CONTROLS

193

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands