Mini CONVERTIBLE Owner'S Manual Download Page 123

Page: 123 / 324

Releasing the transmission lock

electronically

General information

Electronically unlock the transmission lock

to maneuver vehicle from a hazardous area.
Before unlocking the transmission lock, set

the parking brake to prevent the vehicle

from rolling away.

Engaging selector lever position

Unlocking is possible, if the starter can

crank the engine.

Press and hold down brake pedal.

Press the Start/Stop button. The starter

must audibly start.

Press the button on the selector lever,

arrow

1, and press and hold the selector

lever into selector lever position

N, ar-

row

N, until selector lever position

N is

displayed in the instrument cluster.
A Check Control message is displayed.

Release the selector lever.

Release brake, as soon as the starter

stops.

Maneuver the vehicle from the hazard-

ous area and secure it against rolling

away.

With some transmission versions, the pro-

cedure for unlocking is as follows:

Press the Start/Stop button three times

in a row.

Press and hold down brake pedal.

Press the button on the selector lever,

arrow

1, and press and hold the selector

lever into selector lever position

N, ar-

row

N, until selector lever position

N is

displayed in the instrument cluster.
A Check Control message is displayed.

Release the selector lever.

Release the brake.

Maneuver the vehicle from the hazard-

ous area and secure it against rolling

away.

For additional information, see the chapter

on tow-starting and towing.

Steptronic Sport transmission:

Launch Control

Principle

Launch Control enables optimum accelera-

tion on roads with good traction under dry

surrounding conditions.

General information

The use of Launch Control causes prema-

ture component wear since this function

represents a very heavy load for the vehicle.
Do not use Launch Control during the

break-in, refer to page

234

Do not turn the steering wheel when driv-

ing off with Launch Control.

Functional requirements

Launch Control is available as soon as the

engine and transmission are at operating

temperature.

Seite 123

Driving

CONTROLS

123

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands