manualshive.com logo in svg

Mini CONVERTIBLE, Owner'S Manual

The Mini CONVERTIBLE Owner's Manual is your essential guide to fully enjoying the exhilarating ride of this iconic vehicle. Find and download your free manual from our website, delivering comprehensive instructions and insights to help you make the most of your Mini CONVERTIBLE driving experience.

Share
Download
background image

Blue lights

High beams

High beams are switched on.
High beams, refer to page

 

109

.

Hiding Check Control messages

Press the button on the turn signal lever.

Continuous display

Some Check Control messages are displayed

continuously and are not cleared until the

fault is eliminated. If several faults occur at

once, the messages are displayed consecu-

tively.
The messages can be hidden for approx.

8

 

seconds. After this time, they are dis-

played again automatically.

Temporary display

Some Check Control messages are hidden

automatically after approx. 20

 

seconds. The

Check Control messages are stored and can

be displayed again later.

Displaying stored Check Control

messages

Via the Central Information Display (CID):

1.

 

 "My MINI"

2.

"Vehicle status"

3.

Tilt the Controller to the left.

4.

 

 "Check Control"

5.

Select the text message.

Display

Check Control

At least one Check Control message

is displayed or stored.

Text messages

Text messages in combination with an icon

in the instrument cluster explain a Check

Control message and the meaning of the in-

dicator/warning lights.

Supplementary text messages

Additional information, such

 

as on the

cause of an error or the required action, can

be called up via Check Control.
With urgent messages the added text will

be automatically displayed on the Control

Display.
Depending on the Check Control message,

further help can be selected.
Via the Central Information Display (CID):

1.

 

 "My MINI"

2.

"Vehicle status"

3.

Tilt the Controller to the left.

4.

 

 "Check Control"

5.

Select the desired text message.

6.

Select the desired setting.

Messages after trip completion

Certain messages displayed while driving

are displayed again after the ignition is

switched off.

Seite 132

CONTROLS

Displays

132

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Reviews:

No comments

Related manuals for CONVERTIBLE

Hama Pico Operating Instructions preview
Pico
Brand: Hama Pages: 2
iDataLink ADS-ALCA Install Manuals preview
ADS-ALCA
Brand: iDataLink Pages: 30
Kargo Master 40131 Installation Manual preview
40131
Brand: Kargo Master Pages: 5
Atwood Lippert Components LEVELEGS MPD 66385 Manual preview
Lippert Components LEVELEGS MPD 66385
Brand: Atwood Pages: 6
BMW 65 41 2 152 528 Installation Instructions Manual preview
65 41 2 152 528
Brand: BMW Pages: 21
AC Schnitzer DKG Fitting Instructions Manual preview
DKG
Brand: AC Schnitzer Pages: 16
Toyota Sienna 2021 Manual preview
Sienna 2021
Brand: Toyota Pages: 600
Axxess AXRC-CH1 Installation Instructions Manual preview
AXRC-CH1
Brand: Axxess Pages: 8
Dodge Charger 1973 Body Service Manual preview
Charger 1973
Brand: Dodge Pages: 276
Power Acoustik METER 4 Installation preview
METER 4
Brand: Power Acoustik Pages: 4
Ford Mustang 2007 Supplement Manual preview
Mustang 2007
Brand: Ford Pages: 40
Edelbrock 29135 Installation Instructions preview
29135
Brand: Edelbrock Pages: 2
Mercedes-Benz 1989 560 SL Owner'S Manual preview
1989 560 SL
Brand: Mercedes-Benz Pages: 93
Feniex QUAD QSM-8101 Manual preview
QUAD QSM-8101
Brand: Feniex Pages: 4
National Cycle Quantum Wash'n'Wipe N30205 Assembly Instructions And Owner'S Manual preview
Quantum Wash'n'Wipe N30205
Brand: National Cycle Pages: 12
Axxess OESWC-7552-STK Installation Instructions Manual preview
OESWC-7552-STK
Brand: Axxess Pages: 8
Ericsson M-RK 344A4616P1 Installation & Operator'S Manual preview
M-RK 344A4616P1
Brand: Ericsson Pages: 28
Honda 2013 Odyssey Touring Technology Reference Manual preview
2013 Odyssey Touring
Brand: Honda Pages: 21

Brands by name

Popular brands

Load more brands