Mini CONVERTIBLE Owner'S Manual Download Page 26

Page: 26 / 324

Turn signal, high beams, headlight

flasher, roadside parking lights

Turn signal

–

Blinking: press the lever past the resist-

ance point.

–

Triple turn signal activation: lightly tap

the lever up or down.

–

Brief blinking: press the lever to the re-

sistance point and hold it there for as

long as you want the turn signal to

blink.

High beams, headlight

flasher

Press the lever forward or pull it backward.

–

High beams on, arrow

The high beams light up when the low

beams are switched on.

–

High beams off/headlight flasher, ar-

row

Canada: roadside parking light

To illuminate the vehicle on one side.

–

On: with the radio-ready state switched

off, press the lever either up or down

past the resistance point for approx.

seconds.

–

Off: briefly press the lever to the resist-

ance point in the opposite direction.

Lights and lighting

Lighting functions

Icon

Function

Bad weather light.

Automatic headlight control.
Cornering light.

Lights off.
Daytime driving lights.

Parking lights.

Low beams.

Instrument lighting.

Seite 26

QUICK REFERENCE

On the road

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands