Mini CONVERTIBLE Owner'S Manual Download Page 176

Page: 176 / 324

–

When lane markings are covered in

snow, ice, dirt or water.

–

In tight curves or on narrow roads.

–

When lane markings are covered by ob-

jects.

–

When driving very close to the vehicle

in front of you.

–

When driving toward bright lights.

–

When the windshield in front of the in-

terior mirror is fogged up, dirty or cov-

ered with stickers, etc.

–

During calibration of the camera imme-

diately after vehicle delivery.

Manual Speed Limiter

Principle

The system can be used to set a speed limit,

for instance to prevent the vehicle from ex-

ceeding speed limits.

General information

The system can limit the speed, starting at a

value of 20

mph/30

km/h. The vehicle can

be driven at any speed below the set speed

limit.

Exceeding the speed limit

In special situations, the speed limit can be

exceeded by intentional acceleration.
When the vehicle speed exceeds the set

speed limit, a warning is issued.

No brake intervention

If the set speed limit is reached or uninten-

tionally exceeded, such as when driving

downhill, the vehicle is not actively braked.
When the speed limit is set during a trip to

a value below the driving speed, the vehicle

coasts until its driving speed drops below

the set speed limit.

Overview

Steering wheel buttons, left

Button

Function

System on/off.

Increase the speed limit.

Reduce the speed limit.

Operation

Turning on

Press the button on the steering

wheel.

The current speed is accepted as the speed

limit.
If the system is switched on while the vehi-

cle is stationary or driving at low speeds,

mph/30

km/h is set as the speed limit.

The set speed is displayed under the LIMIT

or LIM indicator.
When the speed limit is activated, Dynamic

Stability Control is switched on as neces-

sary.

Turning off

Press the button on the steering

wheel.

The system switches off automatically in

the following situations, for example:

–

When shifting into reverse gear.

–

When the engine is switched off.

–

When cruise control is switched on.

–

When activating Dynamic Traction Con-

trol or deactivating Dynamic Stability

Control.

Seite 176

CONTROLS

Safety

176

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands