Mini CONVERTIBLE Owner'S Manual Download Page 259

Page: 259 / 324

Wheel change between axles

Different abrasion patterns can occur on the

front and rear axles depending on individual

driving conditions. The tires can be rotated

in pairs between the axles to achieve even

abrasion. Further information is available

from a dealer's service center or another

qualified service center or repair shop. After

changing, check the tire pressure and cor-

rect, if needed.

Storing tires

Tire pressure

Do not exceed the maximum tire inflation

pressure indicated on the tire sidewall.

Storage

Store wheels and tires in a cool, dry and

dark place.
Always protect tires against all contact with

oil, grease, and solvents.
Do not leave tires in plastic bags.
Remove dirt from wheels or tires.

Runflat tires

Principle

Runflat tires permit continued driving un-

der limited conditions even in the event of a

complete tire pressure loss.

General information

The wheels are composed of tires that are

self-supporting to a limited degree.
The reinforcement of the sidewall allows

the tire to remain drivable to a limited de-

gree in the event of a tire pressure loss.
Follow the instructions for continued driv-

ing with a flat tire.

Safety information

Warning

The vehicle handles differently when a

runflat tire has insufficient or no tire pres-

sure; for instance, reduced directional sta-

bility when braking, braking distances are

longer and the self-steering properties will

change. There is a risk of accident. Drive

moderately and do not exceed a speed of

mph/80

km/h.

Identification

Runflat tires are labeled with a circular icon

containing the letters RSC marked on the

tire sidewall.

Repairing a flat tire

Safety precautions

–

Park the vehicle as far away as possible

from passing traffic and on solid ground.

–

Turn on the hazard warning system.

–

Secure the vehicle against rolling away

by setting the parking brake.

–

Turn the steering wheel until the front

wheels are in the straight-ahead posi-

tion and engage the steering wheel lock.

–

Have all vehicle occupants get out of the

vehicle and ensure that they remain out-

Seite 259

Wheels and tires

MOBILITY

259

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands