Mini CONVERTIBLE Owner'S Manual Download Page 167

Page: 167 / 324

over steering and braking at any time, and

actively intervene where appropriate.

Warning

Indicators and warnings cannot serve as a

substitute for the driver’s personal judg-

ment. Due to its limits, the system may not

issue warnings or reactions, or these may

be issued late or in a manner that is not

consistent with their normal use. There is

a risk of accident. Adjust driving style to

traffic conditions. Watch surrounding traf-

fic closely and actively intervene where

appropriate.

Warning

Due to system limits, individual functions

can malfunction during tow-starting/

towing with the Intelligent Safety systems

activated. There is a risk of accident.

Switch all Intelligent Safety systems off

prior to tow-starting/towing.

Overview

Button in the vehicle

Intelligent Safety button

Turning on/off

Some Intelligent Safety systems are auto-

matically active after every departure. Some

Intelligent Safety systems activate accord-

ing to the last setting.

Press button briefly:

–

The menu for the Intelligent

Safety system is displayed. The

systems are individually

switched off according to their

respective settings.

–

LED lights up orange or goes out respec-

tive to their individual settings.

Adjust the settings as needed. The individ-

ual settings are stored for the driver profile

currently in use.

Press button again:

–

All Intelligent Safety systems

are switched on.

–

The LED lights up green.

Hold down button:

–

All Intelligent Safety systems

are switched off.

–

The LED goes out.

Forward Collision Warning

with city collision mitigation

Principle

The system may prevent some accidents. In

the event of an accident, the system may re-

duce impact speed.
The system sounds a warning for a possible

risk of collision and activates brakes inde-

pendently, if needed.
The automatic brake intervention occurs

with limited force and duration.

Seite 167

Safety

CONTROLS

167

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands