Mini CONVERTIBLE Owner'S Manual Download Page 186

Page: 186 / 324

If distance control is switched off, refer to

page

188

, higher desired speeds can be se-

lected as well.

Turning on/off and interrupting

cruise control

Turning on

Press the button on the steering

wheel.

Instrument cluster without enhanced

features:
Display in the instrument cluster

lights up.

Instrument cluster without enhanced

features:
Display in the instrument cluster

lights up. The current speed is adopted as

desired speed and displayed with icon.

Instrument cluster with en-

hanced features:
Display in the instrument

cluster lights up. The current

speed is adopted as desired

speed and displayed with icon.

Cruise control is active and maintains the

set speed.
If necessary, the Dynamic Stability Control

will be turned on.

Turning off

With the Stop&Go function for Steptronic

transmissions: when switching off while

stationary, depress the brake pedal simulta-

neously.

Press the button on the steering

wheel.

The displays turn off. The stored set speed

is deleted.

Interrupting manually

Press the button on the steering

wheel.

With the Stop&Go function for Steptronic

transmission: when interrupting while sta-

tionary, depress the brake pedal simultane-

ously.

Interrupting automatically

The system is automatically interrupted in

the following situations:

–

When the driver applies the brakes.

–

Manual transmission: when the clutch

pedal is depressed for a few seconds or

released while a gear is not engaged.

–

If selector lever position N is set.

–

When Dynamic Traction Control is acti-

vated or Dynamic Stability Control is de-

activated.

–

When the Dynamic Stability Control is

adjusting.

–

If the detection range of the camera is

impaired, for instance by contamination,

heavy precipitation or blinding glare

from the sun.

–

Manual transmission: if the vehicle in

front decelerates below a speed of ap-

prox. 20

mph/30

km/h.

–

With the Stop&Go function for Step-

tronic transmissions: following a sta-

tionary period of approx. 3

seconds, af-

ter the vehicle was braked to a stop by

the system.

Adjusting the speed

Maintaining/storing the speed

Press

button in the interrupted

state.
When the system is switched on, the cur-

rent speed is maintained and stored as the

set speed.

Seite 186

CONTROLS

Driving comfort

186

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands