Mini CONVERTIBLE Owner'S Manual Download Page 224

Page: 224 / 324

are unsure, contact your provider. You

MUST operate this device with approved an-

tennas and cables as specified by the manu-

facturer. Antennas MUST be installed at

least 20

cm (8

inches) from any person.

You MUST cease operating this device im-

mediately if requested by the FCC or a li-

censed wireless service provider. Warning

E911 location information may not be pro-

vided or may be inaccurate for calls served

by using this device.
Please observe additionally the following in-

formation

–

Sprint Nextel will allow consumers to

their toll-free number.

–

T-Mobile online registration link:

(www.T-Mobile.com/BoosterRegistra-

tion); (https://saqat.t-mobile.com/sites/

SignalBooster#).

–

Verizon’s online registration link:

(http://www.verizonwireless.com/

wcms/consumer/register-signal-

booster.html).

–

AT&T online registration link (https://

securec45.securewebsession.com/

attsignalbooster.com/).

–

U.S.Cellular online registration link

(http://www.uscellular.com/uscellular/

support/fcc-booster-registration.jsp).

Before use you must register your booster

device with your wireless provider.
If you should be requested by the FCC to

cease operating your booster, you are not

allowed to insert your mobile phone in the

charging tray anymore unless the booster is

permanently deactivated by your local MINI

dealer.
You must not remove the booster from the

car nor use it with any other than the prein-

stalled coupling device or antenna. Any

modification of the existing antenna or cou-

pling device as well as the use of other an-

tennas or coupling devices will cause the

cease of the booster´s operating license.
The booster device fulfills the network pro-

tection standards as required by the FCC,

such as intermodulation limits, oscillation

detection and gain limits.
Booster Manufacturer: Kathrein Automotive
Model Number: LTECOMPB0
Part Number: 6803145-01
FCC-ID: 2ACC7LTECOMPB0

Seite 224

CONTROLS

Interior equipment

224

Online Edition for Part no. 01405A53AA0 - II/22

Summary of Contents for CONVERTIBLE





































































































































































































































































































































Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands

Mini CONVERTIBLE, Owner'S Manual

Search results

Summary of Contents for CONVERTIBLE

Reviews:

Related manuals for CONVERTIBLE

Brands by name

Popular brands