Mini CONVERTIBLE, Owner'S Manual

Page: 278 / 324

Coolant
Vehicle features and options
This chapter describes all standard, country-
specific and optional features offered with
the series. It also describes features and
functions that are not necessarily available
in your vehicle, e.g., due to the selected op-
tions or country versions. This also applies
to safety-related functions and systems.
When using these functions and systems,
the applicable laws and regulations must be
observed.
General information
Coolant consists of water and coolant addi-
tive.
Not all commercially available additives are
suitable for the vehicle. The vehicle manu-
facturer recommends using coolant with the
BMW LC-18 specification. Do not mix addi-
tives of different colors. Observe the water -
additive mixture ratio of 50:50. Information
about suitable additives is available from a
dealer’s service center or another qualified
service center or repair shop.
Safety information
Warning
With the engine hot and the cooling sys-
tem open, coolant can escape and lead to
scalding. There is a risk of injury. Only
open the cooling system with the engine
cooled down.
Warning
Additives are harmful and incorrect addi-
tives can damage the engine. There is a
risk of injury and risk of damage to prop-
erty. Do not allow additives to come into
contact with skin, eyes or articles of cloth-
ing. Use suitable additives only.
Coolant level
Checking
There are yellow minimum and maximum
marks in the coolant reservoir.
1. Let the engine cool down.
2. Open the hood, refer to page 272 .
3. Turn the lid of the coolant reservoir
slightly counterclockwise to allow any
excess pressure to dissipate, then open
it.
4. Open the coolant reservoir lid.
Seite 278
MOBILITY Coolant
278
Online Edition for Part no. 01405A53AA0 - II/22