Mindray VS 8A, Operator'S Manual

Page: 213 / 278

21 - 3
21.4 Checking Version Information
You may be asked for information on monitor and module version.
To view system software version information, select the Main Menu quick key
→
from
the System column select Version .
You can also view more version information by following this procedure
1. Select the Main Menu quick key
→
from the System column select Maintenance
→
input the required password
→
select .
2. Select the Version tab.
You can check system software version, module hardware and software version, and
firmware version.
21.5 Testing Methods and Procedures
Except the following maintenance tasks, all other test and maintenance tasks should be
performed by Mindray-qualified service personnel only.
■
Regular check, including visual inspection and power-on test
■ Recorder test
■
Battery check
Nurse call test If you suspect that the nurse call function does not work
properly.
Electrical Safety Tests
Electrical safety tests
Once every two years.
Other Tests
Power-on test Before use.
Recorder check 1. When the recorder is used for the first time.
2. Follow any repair or replacement of the recorder.
Battery
check Functionality
test 1. When first installed.
2. When battery is replaced.
Performance
test Every three months or if the battery runtime reduced
significantly.
Test/Maintenance Item Recommended Frequency
Performance Tests