Mindray V60 Operator'S Manual Download Page 49

Page: 49 / 90

6-1

Basic Operations

CAUTION

Handle the vaporizer with care. Be careful not to tilt or drop.

Stop using the vaporizer immediately if it has been tilted or dropped.

Do not carry by the control dial or locking lever handle.

Before operation, check that the locking lever is capable of locking the vaporizer

securely onto the manifold.

Only use Anesthetic Vaporizer with anesthetic delivery systems that are suitable

according to ISO80601-2-13.

If the Anesthetic Vaporizer is connected to anesthetic delivery systems from other

manufacturers, it is the responsibility of the operator to ensure that all technical

specifications of the Anesthetic Vaporizer and the anesthetic delivery systems are met.

6.1 Connecting the Vaporizer

1. The interlock device must be in the original position.

Interlock device in the original
position.

Summary of Contents for V60


























































































Search results

Summary of Contents for V60

Reviews:

Related manuals for V60

Brands by name

Popular brands

Mindray V60, Operator'S Manual

Search results

Summary of Contents for V60

Reviews:

Related manuals for V60

Brands by name

Popular brands