Mindray V60, Operator'S Manual

Page: 47 / 90

5-3
2) Set one vaporizer to any concentration.
3) Turn the control dials of other vaporizers. All other vaporizers must be switched off and
impossible to switch on.
4) Switch off the vaporizer. Set the control dial to “0” position.
WARNING
z
When the anesthetic delivery system has three and more than three groups of plug-in
connectors, check if there is an interlock function between nonadjacent connectors.
Otherwise, vaporizers are recommended to be connected right next to each other.
z
Check as per the above items. If these are not done, an incorrect concentration may be
displayed.
z
Interlock device malfunction may cause several vaporizers to be switched on
simultaneously which endangers the patient by resulting in overdosing or a mixture of
anesthetic agents.
6. Check that the vaporizer, connector, and fresh gas circuit are leak-tight (see Instructions for
Use for Anesthetic delivery system).
7. Flush the breathing system with fresh gas before connecting a patient.
WARNING
z
Do not operate the vaporizer until all checks have been carried out and the results meet
the requirements.
z
All repairs must be carried out by qualified service personnel.