Mindray BeneFusion VP5 Operator'S Manual Download Page 6

Page: 6 / 104

Preface

Manual Purpose

This manual contains the instructions necessary to operate the product safely and in

accordance with its function and intended use. Observance of this manual is a

prerequisite for proper product performance and correct operation and ensures

patient and operator safety.

This manual is based on the maximum configuration and therefore some contents

may not apply to your product. If you have any question, please contact us.

This manual is an integral part of the product. It should always be kept close to the

equipment so that it can be obtained conveniently when needed.

Intended Audience

This manual is geared for clinical professionals who are expected to have a working

knowledge of medical procedures, practices and terminology as required for

monitoring of critically ill patients.

Illustrations

All illustrations in this manual serve as examples only. They may not necessarily

reflect the setup or data displayed on your equipment.

Conventions



Italic text

is used in this manual to quote the referenced chapters or sections.



[ ]

is used to enclose screen texts.



is used to enclose the keys.



→

is used to indicate operational procedures.

Summary of Contents for BeneFusion VP5








































































































Search results

Summary of Contents for BeneFusion VP5

Reviews:

Related manuals for BeneFusion VP5

Brands by name

Popular brands

Mindray BeneFusion VP5, Operator'S Manual

Search results

Summary of Contents for BeneFusion VP5

Reviews:

Related manuals for BeneFusion VP5

Brands by name

Popular brands