Mindray BeneFusion VP5, Operator'S Manual

Page: 41 / 104

4-9
NOTE

[Air in line] and [Accumulate air] alarms will not be triggered during
purge.
4.2.9 Set Infusion Parameters
Under each infusion mode, users can set infusion parameters by pressing , ,
, , and .
4.2.10 Infusion
When ready, connect the infusion set to the patient. Press to start the infusion,
and the screen will display the green running icon. An arrow moves from right to left.
The speed of the arrow increases as the rate is increased.
WARNING

Users should inspect and confirm whether the parameter settings are
correct before infusion.

If there is a liquid drug or residue on the ultrasonic sensor or the nearby
tube surface, the user should completely clean the area before infusion.

Users should regularly monitor the connection between the infusion set,
pump and patient, and infuse according to the method mentioned in the
manual.
NOTE

When in running status, if there is no operation in other interface over 2
minutes, it will return to the running screen automatically.
4.2.11 Infusion Pause
During infusion, if changing the drug liquid or infusion set is needed, press to
enter the [ Pause ] interface to stop the infusion. On the [ Pause ] screen, press to
return to the parameters setting interface, and you can modify infusion parameters;