Mindray BeneFusion VP5 Operator'S Manual Download Page 4

Page: 4 / 104

Intellectual Property Statement

SHENZHEN MINDRAY SCIENTIFIC CO., LTD. (hereinafter called Mindray Scientific)

owns the intellectual property rights to this product and this manual. This manual may

refer to information protected by copyrights or patents and does not convey any

license under the patent rights of Mindray Scientific, nor the rights of others.

Mindray Scientific intends to maintain the contents of this manual as confidential

information. Disclosure of the information in this manual in any manner whatsoever

without the written permission of Mindray Scientific is strictly forbidden.

Release, amendment, reproduction, distribution, rental, adaptation, translation of this

manual in any manner whatsoever without the written permission of Mindray

Scientific is strictly forbidden.

and

are the

registered trademarks or trademarks owned by Mindray in China and other countries.

Mindray Scientific is authorized by Mindray to use above registered trademarks or

trademarks.

Responsibility on the Manufacturer

Party

Contents of this manual are subject to changes without prior notice.

All information contained in this manual is believed to be correct. Mindray Scientific

shall not be liable for errors contained herein nor for incidental or consequential

damages in connection with the furnishing, performance, or use of this manual.

Mindray Scientific is responsible for the effects on safety, reliability and performance

of this product, only if:



all installation operations, expansions, changes, modifications and repairs of this

product are conducted by Mindray Scientific authorized personnel;



the electrical installation of the relevant room complies with the applicable

national and local requirements;



the product is used in accordance with the instructions for use.

Summary of Contents for BeneFusion VP5








































































































Search results

Summary of Contents for BeneFusion VP5

Reviews:

Related manuals for BeneFusion VP5

Brands by name

Popular brands

Mindray BeneFusion VP5, Operator'S Manual

Search results

Summary of Contents for BeneFusion VP5

Reviews:

Related manuals for BeneFusion VP5

Brands by name

Popular brands