Mindray BeneFusion VP5 Operator'S Manual Download Page 62

Page: 62 / 104

8-3

8.4 Alarm Countermeasures

WARNING



When an alarm is triggered, the patient's condition should be checked

firstly and operation should only be allowed to proceed after the reason for

the triggering of the alarm is ruled out.

When an alarm is triggered, please follow these steps and take appropriate action:

1. Check the patient;

2. Check the alarm type and the parameter which triggered the alarm;

3. Determine the reason for the alarm;

4. Eliminate the reason for the alarm;

5. Check whether the alarm has cleared.

NOTE



Please refer to C Alarm Information for specific handling procedures for

each alarm.



The operator position shall be the normal operating position of the infusion

pump (0.5m). Otherwise, operators might identify alarm mistakenly.

Summary of Contents for BeneFusion VP5








































































































Search results

Summary of Contents for BeneFusion VP5

Reviews:

Related manuals for BeneFusion VP5

Brands by name

Popular brands

Mindray BeneFusion VP5, Operator'S Manual

Search results

Summary of Contents for BeneFusion VP5

Reviews:

Related manuals for BeneFusion VP5

Brands by name

Popular brands