MIMAKI UJF-605C, Operation Manual

Page: 99 / 154

- 4-11 -
Set the operation for registration marks detection
STEPS:
1. Make sure that the Local mode is dis-
played.
2. Press the [FUNCTION] key.
3. Select the [MARK SENSOR] by pressing
the [ ] key.
4. Press the [ENTER] key.
5. Select the [MARK SETUP], then press the
[ENTER] key.
6. Select an item other than [OFF] for [DE-
TECT] by pressing the [ ] or [ ] keys.
• For the details on numbers of the
detected registration marks, refer to
the Page 4-10.
7. Press the [ENTER] key.
8. Enter a value for [SIZE] by pressing the [ ]
or [ ] keys.
9. Press the [ENTER] key.
10. Select the [FORM] by pressing the [ ] or
[ ] keys.
11. Press the [ENTER] key.
12. Enter the setting value of the [SPEED] by
pressing the [ ] or [ ] keys.
13. Press the [ENTER] key.
<< LOCAL >>
MARK SENSOR
MARK SETUP
< ENT >
MARK SETUP
SPEED
:5cm/s
MARK SETUP
FORM
:TYPE1
MARK SETUP
SIZE
:10mm
MARK SETUP
DETECT
:ALWAYS
MARK SETUP
DETECT
:OFF
MARK SENSOR
MARK SETUP
< ENT >
FUNCTION
MARK SENSOR
< ENT >
FUNCTION
DATE CLEAR
< ENT >
MARK SETUP
FORM
:TYPE2
MARK SETUP
SIZE
:15mm
MARK SETUP
SPEED
:10cm/s