MIMAKI UJF-605C, Operation Manual

Page: 48 / 154

- 2-10 -
Selecting [GAP CHECK]- [SELECT] for head gap adjustment
Select the check method for gap adjustment during printing based on the head gap value
entered. There are three check methods available. Select the check method to be used
according to the media to be used.
When the thickness of media is unknown
Sense mode ............................. Select this mode when the thickness of media varies for
printing operations. The head gap is adjusted for data and
copy printing.
Continue mode ........................ Select this mode when continuously using media of the
same thickness. Once the head gap is adjusted here, it is
no longer adjusted for printing. Be sure to check the gap.
P.2-13
STEPS:
1. Make sure that the LOCAL mode is dis-
played.
2. Press the [FUNCTION] key.
3. Select the [GAP CHECK] by pressing the
[ ] or [ ] keys.
4. Press the [ENTER] key.
5. Select the [SELECT] by pressing the [ ] or
[ ] keys.
6. Press the [ENTER] key.
7. Select the [SENSE] mode or [CONTINUE]
mode by pressing the [ ] or [ ] keys.
8. Press the [ENTER] key, then the device
enters the [SELECT].
<<LOCAL>>
GAP CHECK
SELECT
<ent>
CHECK SELECT
:SENSE
CHECK SELECT
:CONTINUE
GAP CHECK
SELECT
<ent>
GAP CHECK
CHECK START
<ENT>
FUNCTION
GAP CHECK
<ENT>
FUNCTION
DATA CLEAR
<ENT>