MIMAKI UJF-605C, Operation Manual

Page: 93 / 154

- 4-5 -
Setup functions
The function mode provides 9 set functions and a set function contains 9 set functions. The
set functions are outlined below.
Function names Summary
Data clear P.2-24 Data received are cleared when aborting the printing or in prior
to the execution of the [COPY] function.
UV lamp OFF P.4-14 Turn the UV lamp off.
Gap Check P.2-13 Set the gap chechk when media setting
Head Gap* P.2-9 Adjust the height between print head and table.
Set up Type Register a sequence of printing conditions set.
Quality Set the print quality.
Y Distance Fine adjustment for the printing data according to the scale
UV level Adjust the UV lamp volume.
Refresh Solidification of ink can be prevented by refreshing the head
during printing.
Priority Specifies whether the values set on the device (print) are given
priority or the values set.
Ink Layers Sets the number of overprinting if ink coloring is poor.
Color pattern Print a color pattern on the left edge of media to check the nozzle out.
UV SCAN ADD Sets UV irradiation at starting/ ending of drawing.
MM/INCH Set a unit of set values displayed.
Setup reset Resets the current printing conditions.
Maintenance Chapter 5 Operatiing maintenance of the interior carriages
Origin P.2-15 Set the origin for printing.
Mark Sensor P.4-8 Makes settings necessary for detecting registration marks and
detects these marks.
DISPLAY P.4-15 Set the display language.
[Quality]
Sets the print quality.
[STD] : Standard image quality
[Fine] : High image quality and low printing speed
[HIGHspd] : High printing speed and slightly inferior image quality
[Y DISTANCE]
Fine adjustment for the printing data according to the scale
The setting value for the fine adjustment :
±
0.39%