- 2-17 -
Setting precisely the origin ([FUNCTION] - [ORIGIN])
To precisely set the origin of coordinates, set its X- and Y- coordinates from the FUNCTION
menu. This setting value become the origin position (0, 0).
• After setting the origin position (0, 0), it is not cleard even when the power
is turued off. However if origin position was changed by Jog key operation,
the setting value is cleared.
STEPS:
1.
Make sure that the LOCAL mode is dis-
played.
2.
Press the [FUNCTION] key.
3.
Select [ORIGIN] by pressing the [ ] or [ ]
keys.
4.
Press the [ENTER] key.
5.
Select [X OFFSET] by pressing the [EN-
TER] key.
Set the X origin.
6.
Enter the setting value by pressing the [ ]
or [ ] keys.
The number above the offset is indicated the
distance from the origin to the maxiam printing
width.
7.
Press the [ENTER] key, and set the X-
origin.
Display enters the procedure 4.
<<LOCAL>>
X
20mm
10mm
Y
New origin potision
ORIGIN
X OFFSET
<ent>
ORIGIN
( 500mm)
X OFFSET
0mm
ORIGIN
X OFFSET
<ent>
FUNCTION
ORIGIN
<ENT>
FUNCTION
DATA CLEAR
<ENT>
ORIGIN
( 490mm)
X OFFSET
10mm
Summary of Contents for UJF-605C
