- 3-5 -
Cleaning flushing tray
Wipe off waste ink from the flushing tray.
Tools necessary for cleaning: Maintenance cleaning liquid, Gloves, Goggles, Paper towel
• When cleaning the ink station and head, be sure to wear the supplied
goggle and gloves since you may get ink in your eyes.
• Do not move the carriage out of the capping station by hand. Use the
appropriate operation key to move the carriage.
• Make sure to remove the waste ink in the flushing tray frequently. Other-
wise the waste ink dried out solidly under the UV light and may not remove.
STEPS:
1.
Press the [FUNCTION] key from the LO-
CAL mode.
2.
Press the [ ] or [ ] keys until the display
gives the indication [MAINTENANCE].
3.
Press the [ENTER] key.
4.
Press the [ ] or [ ] keys until the display
gives the indication [STATION].
5.
Press the [ENTER] key.
6.
Press the [ENTER] key.
Move the carriage above the table.
7.
Open the left maintenance cover.
<< LOCAL >>
STATION
CARRIAGE OUT
: ent
MAINTENANCE
STATION
< ent >
FUNCTION
LIST
< ENT >
FUNCTION
MAINTENANCE
< ENT >
FUNCTION
DATA CLEAR
< ENT >
Summary of Contents for UJF-605C
