MIMAKI UJF-605C, Operation Manual

Page: 132 / 154

- 5-28 -
Prevent the nozzle clogging of spot color [SP.REFRESH]
To prevent the head nozzle clog, this unit performs refresh while printer is turned on. How-
ever the characteristic of white ink is different from other inks, therefore nozzle out occurs
even performing the refresh. In this case change the head refresh operation, where white
ink is installed, so as to suitable for the white ink. This will prevent the nozzle out.
STEPS:
1. Select the [SP.REFRESH] from the
[MAINTENANCE]. ( P.5-2)
2. Press the [ENTER] key.
• All the initial value of SP. REFRESH is
set to OFF. Indicated as “*”.
3. Select a head to spot color refresh by
pressing the [ ] and [ ] keys.
4. Select ON or OFF of spot color refresh
execution by pressing the [ ] and [ ]
keys.
• Set the head where install the white
ink to ON. Indication shows “W”.
• In the case if white color is installed
onto spot color, due to the ink set
change, set the head to ON. Indication
shows “S”.
5. Press the [ENTER] key to make effective
the setting.
MAINTENANCE
SP.REFRESH
<ent>
SPECIAL REFRESH
COLOR
: ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
SPECIAL REFRESH
COLOR
: ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
SPECIAL REFRESH
COLOR
: ∗ ∗ ∗ ∗ ∗ ∗ W S
MAINTENANCE
SP.REFRESH
<ent>