Milnor E-P Plus, Reference, Page: 31 / 92

Pellerin Milnor Corporation
25
2.3.3.6 Change an Existing Formula
BNCJUP03.C09 0000191939 C.2 D.2 A.8 1/2/20 1:16 PM Released
2.3.3.6.1 How to Insert or Delete a Step in an Existing Formula
BNCJUP03.C10 0000191938 C.2 D.2 B.3 1/2/20 1:16 PM Released
Display or Action Explanation
03 TMMQFFFHC LSCWSS* Cursor blinking on step number indicates that adding or deleting a
step is allowed.
01 112217513 2121250
Provides a help screen for inserting and deleting steps, as shown
below.
START+NEXT/TERM TO
This is the help screen for inserting and deleting steps.
INS/DELETE THIS STEP
Advances the cursor without deleting or duplicating the selected
step. This key accesses the next step and allows for modification
of the values there.
Scrolls through the available choices for the decision indicated by
the cursor.
2.3.3.6.1.1 Inserting a Step
BNCJUP03.C11 0000191937 C.2 D.2 C.3 1/2/20 1:16 PM Released
Display or Action Explanation
Duplicates the selected step to the next numerical position. If this
is Step 01, the duplicated step becomes the new Step 01 and all
the following steps move to the next higher numerical position.
Duplication of
End Formula
or
Extract
steps is prevented by the
controller.
03 TMMQFFFHC LSCWSS* This display indicates that the new step has been created as a copy
of the previous step.
0 1 NEW STEP01 DUPED
2.3.3.6.1.2 Deleting a Step
BNCJUP03.C12 0000191936 C.2 D.2 B.3 1/2/20 1:16 PM Released
Display or Action Explanation
Deletes the selected step. The next step becomes the current step
by assuming the number of the step that was just deleted. All fol-
lowing steps move one number lower.
Deletion of
End Formula
is prevented in all cases. A
Bath
step
cannot be deleted if it falls between two Extract steps.
03 TMMQFFFHC LSCWSS* This display indicates that the selected step has been deleted from
the wash formula.
01 STEP DELETED
Programming