Milltronics AiRanger SPL PL-573, Instruction Manual

Page: 60 / 113

Page 60 AiRanger SPL PL-573
Enhancement Pa
ra
m.
Rate Parameters (P700 to P707)
P700 Max Fill Rate
Adjust the SPL response to increases in the actual material level (or advance to a
higher Failsafe Material Level, P071).
Enter a value slightly greater than the maximum vessel filling rate.
This value (in Units (P005) or % of Span (P007) per minute) is automatically altered
when Measurement Response (P003) is altered. See Technical Reference
Measurement Response.
Values:
0.000 to 9999
P701 Max Empty Rate
Adjust the SPL response to decreases in the actual material level (or advance to a
lower Failsafe Material Level, P071).
Enter a value slightly greater than the maximum vessel emptying rate.
This value (in Units (P005) or % of Span (P007) per minute) is automatically altered
when Measurement Response (P003) is altered. See Technical Reference
Measurement Response.
Values:
0.000 to 9999
P702 Filling Indicator
Enter the fill rate required to activate the LCD Material Filling indicator.
This value (in Units (P005) or % of Span (P007) per minute) is automatically set to
10% of the Max Fill Rate (P700).
Values:
-999 to 9999
P703 Emptying Indicator
Enter the empty rate required to activate the LCD Material Emptying indicator.
This value (in Units (P005) or % of Span (P007) per minute) is automatically set to
10% of the Max Empty Rate (P701) .
Values:
-999 to 9999