MS-890 Industrial Automation Scanner
User Manual
7-9
Matchcode
Sequence On Mismatch
Note
:
Matchcode
must be set to
Sequential
for this command to function.
The scanner will sequence the master to one more/less than the decoded symbol. As an
example of
Sequence On Mismatch Enabled
, consider the following decodes:
As an example of
Sequence On Mismatch Disabled
, consider the following decodes:
You can access
Master Symbol
operations from the
Utilities
menu.
Usage:
Enable this parameter if every trigger event should have a decode
and
more than one consecutive mismatch may occur.
Disable this parameter if every trigger event should have a decode but no
more than one consecutive mismatch may occur.
Definition:
When set to
Enabled
, the master symbol sequences on every decode,
match or mismatch.
When set to
Disabled
, the master symbol will not sequence whenever
consecutive mismatches occur.
Serial Cmd:
<
K223,
matchcode type,sequential matching,match start position,
match length,wild card character,sequence on No Read,
sequence on mismatch
>
Default:
Disabled
Options:
0 = Disabled
1 = Enabled
Master symbol
Decoded symbol
Master symbol after decode
001
001
002
002
002
003
003
abc
004 (sequenced on mismatch)
004
004
005
005
def
006 (sequenced on mismatch)
006
ghi
007 (sequenced on mismatch)
007
007
008
Master symbol
Decoded symbol
Master symbol after decode
001
001
002
002
002
003
003
abc
004 (sequenced because of previous match)
004
004
005
005
def
005 (sequenced because of previous match)
005
ghi
005 (not sequenced because of previous mismatch)
005
005
006
Summary of Contents for MS-890
