Microscan MS-890, User Manual, Page: 128 / 308

6-6
MS-890 Industrial Automation Scanner User Manual
No Read Message
No Read Message
No Read Status
No Read Message
Note: No Read Message will only be transmitted if Symbol Output is set to Match ,
Mismatch or Good Read .
No Read Message can be set to any ASCII characters except NUL , < , > , and , .
Usage: Used in applications where the host needs serial verification that a symbol
has not been read and especially useful in new print verification.
Definition: When enabled, and if no symbol has been decoded before timeout or the
end of the read cycle, the No Read message will be transmitted to the host.
Serial Cmd: < K714, status ,message>
Default: Enabled
Options: 0 = Disabled 1 = Enabled
Definition: Any combination of ASCII characters can be defined as the No Read
message.
Serial Cmd: < K714, status, message >
Default: NOREAD
Options: 1 to 128 ASCII characters.