Microscan MS-890, User Manual

Page: 112 / 308

5-18
MS-890 Industrial Automation Scanner User Manual
UPC/EAN
Separator Character (UPC/EAN)
Note: If Separator Character has been changed to any other character and you wish to
redefine the separator as a comma, you will need to use
ESP
or the embedded menu.
Note: Whenever Separator Character is defined as a comma ( , ) sending a <K473,?>
command will return the current settings, including the separator character comma which
appears after the separator status comma.
Supplemental Type (UPC/EAN)
Usage: As required by the application.
Definition: Allows the user to change the separator character from a comma to a new
character.
Serial Cmd: < K473, UPC status,EAN status,supplemental status,separator status,
separator character ,supplemental type>
Default: , (comma)
Options: Any ASCII character
Usage: As required by symbology used in application.
Definition: Allows the user to select 2 character or 5 character supplement, or both.
Serial Cmd: <
K473,
UPC status,EAN status,supplemental status,separator status,separator
character,
supplemental type
>
Default: Both
Options: 0 = Both
1 = 2 characters only
2 = 5 characters only
Both: Either 2 character or 5 character supplementals will be considered valid.
2 Char Only: Only two character supplementals will be considered valid.
5 Char Only: Only five character supplementals will be considered valid.