Operator Maintenance 97
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator‘s Manual SOLID T4 / T5 / T6 / T8
Edition 2.0
7.2.2. Head Resistance Value Setting
F
F
By using this function the head resistance has to be adjusted
after a printhead exchange (Input of the new printhead’s
resistance value).
This setting has to be done first after turning the printer on.
It is not allowed to interrupt the settings by switching the printer
off.
If the new printhead meets the requirements an automatically
printhead identification happens.
By activating the “Head Resistance Value Setting” control panel
function the automatically measured value is displayed.
In this case, an input or alteration of the head resistance value
is not possible and not necessary, too.
Starting the printer in the
Service Mode:
ON LINE
↵
+
FEED
Ù
Turn the printer on
Panel display
[Service Mode ]
Notes
Before starting the printer the
ON LINE
↵
key and the FEED
s
key
have to be pressed simultaneously.
Turn the printer on and keep the keys
ON LINE
↵
and FEED
s
pressed
until the message [Service Mode] is
displayed
shortly
.
Now the functions of the service
mode are available (compare
dashed areas in the Menu Structure
of chapter 5.6).
Summary of Contents for LOGIJET T4
Page 108: ......
