36 Handling of Consumables
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T4 / T5 / T6 / T8
Edition 2.0
setting screw
Fig. 4.5.b Increasing the printhead‘s contact pressure
The factory setting for the printhead contact pressure is Setting 1
(setting for thin/narrow material).
For medium head contact pressure turn the arrow to Setting 2
until it lightly clicks into place.
To get a further increased printhead’s contact pressure turn the
arrow to Setting 3 until it lightly clicks into place.
Please note:
F
- Printing should always be carried out with the lightest contact
pressure possible for creating a satisfactory print quality. This
protects the printhead and the entire device.
- Excessive contact pressure can result in premature wearing of
the printhead.
- See also chapter 7.2 Printhead Exchange
and chapter 7.3 Adjusting the Right Pressure Value.
Summary of Contents for LOGIJET T4
Page 108: ......
