14 Installation
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T4 / T5 / T6 / T8
Edition 2.0
2.2. Printer Unpacking
1.
Open the box and remove the parts lying on top.
2.
Remove the foam covering.
3.
Take hold of the SOLID printer from the bottom and lift it out
the box carefully. (Get somebody to hold the box when
removing the printer).
Do not use other parts of the printer (e.g. the cutter or the
magazine ...) to lift the device!
Fig. 2.2.a Lifting the printer out of the box
4.
Set the device down.
Fig. 2.2.b Setting the printer down
Summary of Contents for LOGIJET T4
Page 108: ......
